Sr - Strontium

Click on the material to see more complete information about its chemical composition.
Element CCRMP
Material
Concen-
tration
Units Classification*
Sr non AD2 RTS-3a 44.7 µg/g Certified
Sr SO-3 217 µg/g Certified
Sr SY-4 1191 µg/g Certified
Sr CCU-1d 4.9 µg/g Provisional
Sr WPR-1 7 µg/g Provisional
Sr FER-3 31 µg/g Provisional
Sr WMS-1a 31.3 µg/g Provisional
Sr SCH-1 35 µg/g Provisional
Sr FER-2 58 µg/g Provisional
Sr FER-4 62 µg/g Provisional
Sr FER-1 90 µg/g Provisional
Sr TILL-4 109 µg/g Provisional
Sr LKSD-4 110 µg/g Provisional
Sr WGB-1 118 µg/g Provisional
Sr TILL-2 144 µg/g Provisional
Sr STSD-1 170 µg/g Provisional
Sr LKSD-2 220 µg/g Provisional
Sr STSD-3 230 µg/g Provisional
Sr TDB-1 230 µg/g Provisional
Sr LKSD-3 240 µg/g Provisional
Sr LKSD-1 250 µg/g Provisional
Sr TILL-1 291 µg/g Provisional
Sr TILL-3 300 µg/g Provisional
Sr STSD-4 350 µg/g Provisional
Sr CCU-1c 4 µg/g Informational
Sr RTS-4 12 µg/g Informational
Sr RTS-2 30 µg/g Informational
Sr RTS-1 60 µg/g Informational
Sr BL-2 70 µg/g Informational
Sr BL-3 70 µg/g Informational
Sr DS-1 70 µg/g Informational
Sr GTS-2 95 µg/g Informational
Sr CH-4 209 µg/g Informational
Sr SU-1b 280 µg/g Informational
Sr HV-2 491 µg/g Informational
Sr MA-3a 850 µg/g Informational
Sr MA-2c 1471 µg/g Informational
Sr CLV-1 ≤310 µg/g Informational
Sr CLV-2 ≤530 µg/g Informational
Sr BL-5 0.03 % Informational
Sr OKA-1 1 % Informational
SrO OKA-2 0.66 % Informational

*Classification of the results by level of agreement

All concentration values are derived from an interlaboratory measurement program. Samples are sent to many laboratories, typically twenty to forty, and the results are analyzed statistically to determine the mean and other statistical parameters.

Certified: The value is calculated from a minimum of 10 sets of data that fulfill specific statistical criteria regarding agreement.

Provisional: The value is calculated from 8 or 9 sets of data that fulfill specific statistical criteria regarding agreement; or alternatively, more than 9 sets of data that do not fulfill the specific statistical criteria required for certification.

Informational: The value is calculated from 7 or fewer sets of data.

Note: Because of different digestion methods used, a single material may show different concentrations for a specific element. Details about methods are provided on the certificate and in the report.