Sc - Scandium

Click on the material to see more complete information about its chemical composition.
Element CCRMP
Material
Concen-
tration
Units Classification*
Sc SY-4 1.1 µg/g Certified
Sc LKSD-4 7 µg/g Provisional
Sc LKSD-1 9 µg/g Provisional
Sc TILL-3 10 µg/g Provisional
Sc TILL-4 10 µg/g Provisional
Sc TILL-2 12 µg/g Provisional
Sc WPR-1 12 µg/g Provisional
Sc LKSD-2 13 µg/g Provisional
Sc LKSD-3 13 µg/g Provisional
Sc STSD-3 13 µg/g Provisional
Sc TILL-1 13 µg/g Provisional
Sc STSD-1 14 µg/g Provisional
Sc STSD-4 14 µg/g Provisional
Sc TDB-1 36 µg/g Provisional
Sc WGB-1 44 µg/g Provisional
Sc2O3 OKA-2 0.004 % Provisional
Sc FER-1 0.8 µg/g Informational
Sc FER-4 1.5 µg/g Informational
Sc CCU-1c 2 µg/g Informational
Sc HV-2 3 µg/g Informational
Sc MP-1b 3 µg/g Informational
Sc WMS-1a 3 µg/g Informational
Sc FER-2 6 µg/g Informational
Sc DS-1 9 µg/g Informational
Sc SU-1b 9 µg/g Informational
Sc RTS-3a 10 µg/g Informational
Sc CH-4 13 µg/g Informational
Sc MA-1b 13 µg/g Informational
Sc MA-2c 17.47 µg/g Informational

 

*Classification of the results by level of agreement

All concentration values are derived from an interlaboratory measurement program. Samples are sent to many laboratories, typically twenty to forty, and the results are analyzed statistically to determine the mean and other statistical parameters.

Certified: The value is calculated from a minimum of 10 sets of data that fulfill specific statistical criteria regarding agreement.

Provisional: The value is calculated from 8 or 9 sets of data that fulfill specific statistical criteria regarding agreement; or alternatively, more than 9 sets of data that do not fulfill the specific statistical criteria required for certification.

Informational: The value is calculated from 7 or fewer sets of data.

Note: Because of different digestion methods used, a single material may show different concentrations for a specific element. Details about methods are provided on the certificate and in the report.