Language selection

Search


SO-3 Certificate of Analysis

So-3 is discontinued and no longer available for purchase

Certified Reference Material: Soil Samples

Printable version of the certificate (PDF, 690.09  kb)

First Issued : January 1979
Version: January 1979

Recommended Values ± 95% Confidence Interval
Si 15.86 ± 0.19% Sr 217 ± 29 µg/g
Ca 14.63 ± 0.40% Zn 52 ± 3 µg/g
Mg 4.98 ± 0.10% Rb 39 ± 3 µg/g
Al 3.06 ± 0.11% V 38 ± 6 µg/g
Fe 1.51 ± 0.06% Cr 26 ± 3 µg/g
K 1.16 ± 0.05% Cu 17 ± 1 µg/g
Na 0.74 ± 0.04% Ni 16 ± 3 µg/g
Ti 0.20 ± 0.02% Pb 14 ± 3 µg/g
Mn 0.052 ± 0.002% Co 8 ± 3 µg/g
P 0.048 ± 0.005% Hg 0.017 ±0.007 µg/g
Ba 296 ± 39 µg/g    

Description

SO-3 is of the calcareous till parent material of the Guelph series, a Gray Brown Luvisol. It has an appreciable content of both calcite and dolomite. The sampling sight was near Guelph, Ontario at 43°33,N, 80°19'W.

The soil was dried in 70-kg batches at 120°C for 17 hours. The gravel fragments were removed and the soil was ball-milled to -74 µm. The batches were blended in one lot and bottled in 200-g units.

Six bottles were selected on a random basis to assess the homogeneity by X-ray fluorescence. Although some bottle-to-bottle differences were detected, these were assumed to be minor com- pared to the anticipated between-laboratory standard deviations. Indeed, the statistical treatment of the analytical results of the interlaboratory certification program indicated no abnormal inhomogeneity.

Certification

SO-3 was characterized by an interlaboratory analysis method. The recommended values are the unweighted means of 67 to 230 accepted analytical results from 8 to 30 laboratories for the various constituents. Atomic absorption was the most widely used technique. X-ray fluorescence, emission spectroscopy, colorimetric, neutron activation analysis and titrimetric techniques were also employed.

Instructions for use

SO-3 should be dried at 105°C for 16 hours before use.

Legal notice

The Canadian Certified Reference Materials Project has prepared this reference material and statistically evaluated the analytical data of the interlaboratory certification program to the best of its ability. The Purchaser by receipt hereof releases and indemnifies the Canadian Certified Reference Materials Project from and against all liability and costs arising out of the use of this material and information.

Reference

The certification report is available upon request.

For further information

CCRMP, CanmetMINING
555 Booth Street
Ottawa, ON   K1A 0G1
Canada

Telephone: 343-543-6830
E-mail: Contact CCRMP

Go back to Discontinued Certified Reference Materials

Page details

Report a problem on this page
Please select all that apply:

Thank you for your help!

You will not receive a reply. For enquiries, contact us.

Date modified: