Language selection



I-beams of various sizes
Larger image [46 kb JPG]

Product description

Prefabricated wooden I-beams are engineered structural products used for floor joists and roof rafters. They are made in the shape of an “I” from two flanges of a structural wood product connected by a web of structural panel products (see diagram). I-beams offer an alternative to dimension lumber in floor joists (supports) and roof rafters but use as little as 50% of the wood that lumber would require, doing more with less.

Technical information

Because of their composition, wooden I-beams can be produced to meet a wide variety of performance standards. The material used for the flanges (e.g., machine stress rated lumber, laminated veneer lumber or oriented strand lumber) and web (e.g., plywood, oriented strand board) as well as their size can be chosen to meet the requirements of particular uses. I-beams are lightweight, very uniform and not prone to warping. Their relatively light weight means that they can be installed manually, although special connectors are required because of the cross-sectional shape of the beams. Holes for electrical, plumbing or mechanical services may be pre-punched or drilled through the web, but the size, number and location of the holes must follow the manufacturer’s recommendations.

Report a problem on this page
Please select all that apply:

Thank you for your help!

You will not receive a reply. For enquiries, contact us.

Date modified: