Language selection

Search


DH-1a Certificate of Analysis

Certified Reference Material: Uranium-Thorium Ore

Printable version of the certificate (PDF, 129.01 kb)

First Issued :December 1994
Version: December 1994

Recommended values ± 95% Confidence interval
U 0.2629 ± 0.0003%
Th 0.091 ± 0.003%
Ra-226 31.5 ± 1.1 Bq/g
Pb-210 30.8 ± 0.9 Bq/g

Description

DH-1a is intended as a replacement for DH-1 of which the stock is exhausted. It is ore typical of the property of Denison Mines Limited in Elliot Lake, Ontario, and is a sericitic feldspathic quartzite containing approximately 10% pyrite. The radioactive minerals are uraninite and brannerite and possibly traces of monazite and uranothorite. The bulk material was dry-ground to minus 74 µm, blended and bottled in 200-g units. The homogeneity of DH-1a was confirmed using the volumetric-umpire method for uranium.

Certified values

The certified value of uranium is the mean of 45 determinations by the volumetric-umpire method performed at CANMET to confirm the homogeneity of DH-1a. In addition, a sufficient number of results for uranium were submitted by nine laboratories to give a consensus value of 0.260% and 95% confidence intervals of ± 0.003%. Herein, instrumental techniques, X-ray fluorescence and neutron activation analysis, were predominant. The consensus value for thorium is the unweighted mean of 66 accepted analytical determinations by 12 laboratories. Methods included colorimetry, X-ray fluorescence, neutron activation analysis and radiometry.

Instruction for use

The recommended values for DH-1 a pertain to an "as is" basis.

Legal notice

The Canadian Certified Reference Materials Project has prepared this reference material and statistically evaluated the analytical data to the best of its ability. The Purchaser by receipt hereof releases and indemnifies the Canadian Certified Reference Materials Project from and against all liability and costs arising out of the use of this material and information.

Reference

The preparation and certification procedures used for DH-1a are given in CANMET Reports 81-11E "DH-1a: A Certified Uranium-Thorium Reference Ore", 83-9E "Radium-226 in Certified Uranium Reference Ores DL-1 a, BL-4a, DH-1a and BL-5" and 84-11E "Lead-210 in Certified Uranium Reference Ores DL-1 a, BL-4a, DH-1 a and BL-5" which are available free of charge on request.

For further information

CCRMP, CanmetMINING
555 Booth Street
Ottawa, ON K1A 0G1
Canada

Telephone: 613-995-4738
Facsimile: 613-943-0573
E-mail: Contact CCRMP

Go back to Price Certificate List

Page details

Report a problem on this page
Please select all that apply:

Thank you for your help!

You will not receive a reply. For enquiries, contact us.

Date modified: